This Video Splitter will duplicate and boost the input signal to 2 VGA, SVGA, XGA, QXGA, UXGA or Multi-sync Monitors, with a signal bandwidth of 300 Mhz

• With 300MHz pixel frequency 2048x1536 60 Hz
• Extend the video signal up to 65 metre (213 feet)
• Supports DDC, DDC2, DDC2B. (For video output port 1)
• Can be cascaded
• The output is compatible with standard VGA card

Requires 1 x HD15 M-F Cable for input

Requires 1 x HD15 M-F Cable for input

Please note this splitter comes with one receiver unit (VB552 Repeater + Audio) others can be purchased seperately

Datasheet

The VS1204T A/V Over Cat 5 Splitter is a cost-effective and efficient solution for sending high quality audio and video content to multiple displays. Connect to an ATEN A/V Over Cat 5 Receiver* via Cat 5e cable and the displays can be located up to 300 m (1000 ft) away from the single input source. The VS1204T is ideal forprofessional A/V installations that require multimedia content to delivered to multiple destinations.

*Compatible Receiver Units:

• VE170R A/V Over Cat 5 Receiver
• VE170RQ A/V Over Cat 5 Receiver with Deskew

Datasheet

The VS1208T A/V Over Cat 5 Splitter is a cost-effective and efficient solution for sending high quality audio and video content to multiple displays. Connect to an ATEN A/V Over Cat 5 Receiver* via Cat 5e cable and the displays can be located up to 300 m (1000 ft) away from the single input source. The VS1208T is ideal forprofessional A/V installations that require multimedia content to delivered to multiple destinations.

*Compatible Receiver Units:

• VE170R A/V Over Cat 5 Receiver
• VE170RQ A/V Over Cat 5 Receiver with Deskew

Datasheet

The VE170R is a receiver unit compatible with the VE170T, VE1204T& VE1208T

• 1920x1200 @ 60Hz (30m)
• 1600x1200 @ 60Hz (150m)
• 1024x768  @ 60 Hz (300m)

Datasheet

The VE170RQ is a receiver unit compatible with the VE170T, VE1204T& VE1208T

The VE170RQ features ATEN patented Deskew technology, which supports the manual synchronization of RGB signals and corrects colour phase and timing errors that occur over large distances.

• 1920x1200 @ 60Hz (150m)
• 1280x1024 @ 60 Hz (300m)

Datasheet

Please note this splitter comes with one receiver unit (VB552 Repeater + Audio) others can be purchased seperately

Datasheet

The VB552 VGA Over Cat 5 Repeater +Audio is an audio/video signal extension device which is compatible with ATEN Cat 5 Audio/Video splitters. The VB552 extends the audio/video transmission range an extra 150m over Cat 5e (or higher) cables. The use of an additional repeater means the audio/video signals can be transmitted over even longer distances, up to 450m.

Furthermore, for longer distance installations where video signals may degrade, the VB552 has adjustable video gain and compensation controls to provide the sharpest video quality possible. An IR remote control also provides picture control at the remote site.

Rack-mountable, with two RS-232 channels on the unit for selection, and support for high video resolutions, the VB552 is the perfect solution to extend the range of your A/V and serial transmissions in any installation environment requiring VESA FDMI mount standards.

Datasheet

4-way transmitter for point-to-multipoint The ALPV154T is able to take the same HD input and send it to 4 different screens connected via the ALPV150R receivers. There is a feed through port on the unit to allow a local display or you can cascade another ALAV154T so you can supply 8 screens.

Further information on PV154TDatasheetALPV154T Manual

The AdderLink LPV digital signage receiver unit is used with a suitable transmitter unit form the same range, for example the ALPV154T 4 port transmitter unit

The USB 2.0 VGA Adapter enables you to connect any VGA / SVGA monitor, LCD Screen or projector to your PC or notebook. It can be used to show the same screen, or to extend your computer desktop onto a secondary monitor. Requires Microsoft Windows 2000, XP or VISTA to be installed.

• 1920 x 1200 at 8,16 Bits
  
• 1920 x 1080 at 8,16 Bits
• 1680 x 1050 at 8,16,32 Bits
• 1600 x 1200 at 8,16,32 Bits
• 1440 x 900 at 8 16,32 Bits
• 1280 x 800 at 8,16,32 Bits
• 1280x 768 at 8,16,32 Bits
• 1280 x 1024 at 8,16,32 Bits
• 1280 x 960 at 8,16,32 Bits
• 1152 x 864 at 8,16,32 Bits
• 1024 x 768 at 8,16,32 Bits
• 800 x 600 at 8,16,32 Bits

Transmitter unit only - requires receiver units

The AdderLink AV200 series have the following features;

• Crystal clear digital audio quality at 44.1kHz Stereo
• Crisp, sharp, fully saturated video quality even at 1000ft
• Resolution up to 1600x1200@60Hz
• Compact size
• Compact rack-mountable chassis for large installations
• Receiver units with fully adjustable de-skew ensuring maximum video quality
• Cascade transmitters to support up to 64 VDUs from a single source
• Dual video/audio output on the receiver supports back to back monitors applications

Further information on the ALAV200Data SheetManual


AWAITING STOCKIn stock Price: £299.00
(£358.80 Including VAT at 20%)

Transmitter unit only - requires receiver units

The AdderLink AV200 series have the following features;

• Crystal clear digital audio quality at 44.1kHz Stereo
• Crisp, sharp, fully saturated video quality even at 1000ft
• Resolution up to 1600x1200@60Hz
• Compact size
• Compact rack-mountable chassis for large installations
• Receiver units with fully adjustable de-skew ensuring maximum video quality
• Cascade transmitters to support up to 64 VDUs from a single source
• Dual video/audio output on the receiver supports back to back monitors applications

Further information on the ALAV200Data SheetManual


AWAITING STOCKIn stock Price: £349.00
(£418.80 Including VAT at 20%)

Receiver unit only - used in conjunction with AV200 series Transmitters

The AdderLink AV200 series have the following features;

• Crystal clear digital audio quality at 44.1kHz Stereo
• Crisp, sharp, fully saturated video quality even at 1000ft
• Resolution up to 1600x1200@60Hz
• Compact size
• Compact rack-mountable chassis for large installations
• Receiver units with fully adjustable de-skew ensuring maximum video quality
• Cascade transmitters to support up to 64 VDUs from a single source
• Dual video/audio output on the receiver supports back to back monitors applications

Further information on the ALAV200Data SheetManual

Receiver unit only - used in conjunction with AV200 series Transmitters

The AdderLink AV200 series have the following features;

• Crystal clear digital audio quality at 44.1kHz Stereo
• Crisp, sharp, fully saturated video quality even at 1000ft
• Resolution up to 1600x1200@60Hz
• Compact size
• Compact rack-mountable chassis for large installations
• Receiver units with fully adjustable de-skew ensuring maximum video quality
• Cascade transmitters to support up to 64 VDUs from a single source
• Dual video/audio output on the receiver supports back to back monitors applications

Further information on the ALAV200Data SheetManual


AWAITING STOCKIn stock Price: £220.00
(£264.00 Including VAT at 20%)

Requires 1 x HD15 M-F Cable for input

• CatX Video Rx for distances up to 120m
• CatXQ Video Rx for distances up to 300m
• CatX Video Rx 2 for two VGA outputs up to 120m
• CatXQ Video Rx 2 for two VGA outputs up to 300m (includes skew correction)

• CatX Video Rx for distances up to 120m
• CatXQ Video Rx for distances up to 300m
• CatX Video Rx 2 for two VGA outputs up to 120m
• CatXQ Video Rx 2 for two VGA outputs up to 300m (includes skew correction)

• CatX Video Rx for distances up to 120m
• CatXQ Video Rx for distances up to 300m
• CatX Video Rx 2 for two VGA outputs up to 120m
• CatXQ Video Rx 2 for two VGA outputs up to 300m (includes skew correction)

• Receives video and stereo audio over Cat5/5e/6 cable to a distance of 300m
• XSQ™ technology
• SVGA Output up to 1024 x 768 75Hz at maximum distance
• Higher resolution may be achievable at shorter distances
• High quality video at all distances

In the basic form, the configuration is a Transmit unit and a Receive unit; however, source signals can also be split to provide simultaneous multiple displays if required. Whilst VGA is video only, these devices cleverly allow for the transmission of the audio signal as well!

In the basic form, the configuration is a Transmit unit and a Receive unit; however, source signals can also be split to provide simultaneous multiple displays if required. Whilst VGA is video only, these devices cleverly allow for the transmission of the audio signal as well!

In the basic form, the configuration is a Transmit unit and a Receive unit; however, source signals can also be split to provide simultaneous multiple displays if required. Whilst VGA is video only, these devices cleverly allow for the transmission of the audio signal as well!

In the basic form, the configuration is a Transmit unit and a Receive unit; however, source signals can also be split to provide simultaneous multiple displays if required. Whilst VGA is video only, these devices cleverly allow for the transmission of the audio signal as well!

In the basic form, the configuration is a Transmit unit and a Receive unit; however, source signals can also be split to provide simultaneous multiple displays if required. Whilst VGA is video only, these devices cleverly allow for the transmission of the audio signal as well!

Features magnetic and removeable screwplate mountings.