The Cascadable PDUexpert KWX-N4 Series is part of a new generation of PDU which combines network power distribution, environmental monitoring and real-time remote power consumption data showing total current load and voltage along with each outlet's ON/OFF status.

The KWX-N series is a remote monitor PDU with embedded multithreading inner core RTOS (Real Time Operating Systems), that supports multitask and multiuser access. The software supports various TCP/IP protocols, including HTTP, HTTPS, SSL, SNMP, TELNET, SSH, SMTP etc.

Features

• Sensor recognition
• Monitoring of total current, kwh and input voltage
• Per Outlet Power consumption monitoring
• Per outlet switching
• Sequential boot up, power on/off
• Power status holding
• Surge protection
• Fused per outlet
• Inspect the fuse status of each ports
• Power factor recognition
  
• Alarm
  • Total current over the limit
  • on the total current limit
  • on each port current limit
  • on the temperature limit
  • on the humidity limit

Optional

• Temperature and humidity
• Smoke alarm
• Water logging alarm
• PIR entry alarm
• Door open alarm

The PDUeX POM (Per Outlets Monitoring) Series of PDU comes with user friendly management software allowing a Data Centre Manager to remotely control and monitor simultaneously the power consumption of multiple PDUs.

Features:

• Built-in web server, Data Centre Manager monitor the current consumption of the power strip in real time.
• Built-in true RMS current meter.
• Easy to set up, read IP address directly (*Press and hold the key after 2 beeps display of the IP address)
• Homepage support SSL.
• Provide per outlet power consumption.
• Provide audible alarm when the power consumption exceeds threshold.
• Send email and traps when the power consumption exceeds the trigger
  value
• Provides PDUeX utility, to monitor a large mount of PDUs at the Datacentre simultaneously.
• Support the SNMP and provide MIB for the PDU to be monitored by
  NMS.
• Provide per outlet power protection by the circuit breaker.
• Real time control of PDU outlets.
• Indicates outlet and circuit status with LED.
• Support power on sequence.
• Optional accessory can support temperature and humidity detection.

This high capacity PDU is fed by dual IEC 309 terminated 3 metre power cables and provides a maximum draw of 32 Amps (16 Amps max per outlet). The management software (included) allows remote control and monitoring of the power consumption of multiple PDUs simultaneously.

Features:

• Built-in web server, Data Centre Manager monitor the current consumption of the power strip in real time.
• Built-in true RMS current meter.
• Easy to set up, read IP address directly (*Press and hold the key after 2 beeps display of the IP address)
• Homepage support SSL.
• Provide per outlet power consumption.
• Provide audible alarm when the power consumption exceeds threshold.
• Send email and traps when the power consumption exceeds the trigger
  value
• Provides PDUeX utility, to monitor a large mount of PDUs at the Datacentre simultaneously.
• Support the SNMP and provide MIB for the PDU to be monitored by
  NMS.
• Provide per outlet power protection by the circuit breaker.
• Real time control of PDU outlets.
• Indicates outlet and circuit status with LED.
• Support power on sequence.
• Optional accessory can support temperature and humidity detection.